M35-2 Top Entry Ball Valve: construction and material review
A top-entry ball valve is defined by its valve construction, while specified material grade selection depends on the process conditions and the specified material standard. Check whether the RFQ requires top-access maintenance and trunnion support; these are separate design requirements. This page is an engineering enquiry guide, not a confirmed stock or approved manufacturing specification.
Technical selection checklist
| Design requirement | Construction review: top cover retention, isolation before maintenance, overhead access clearance, seat access and cover gasket selection. Verify drawing, pressure class, end connection and operating method for the selected size. |
|---|---|
| Material-grade review | Material review: Confirm exact ASTM/UNS designation, supplied product form, fluid chemistry and pressure-temperature limitations before material approval. Confirm wetted versus pressure-retaining parts separately; a trim material does not establish body grade. |
| Engineering checklist | For top-entry ball valve: top cover retention, isolation before maintenance, overhead access clearance, seat access and cover gasket selection. For the specified grade: obtain traceability, manufacturing route and project-specific inspection scope. |
| Application and selection | Fit for service depends on medium composition, operating/maximum temperature, pressure differential, solids, cycling and shutoff performance. Check whether the RFQ requires top-access maintenance and trunnion support; these are separate design requirements. |
| Documents to request | Request the drawing, technical datasheet, material bill of materials, end connection, seat construction, proposed tests, material certification and actuator details when relevant. Grade-specific availability and test conditions must be confirmed by a formal quotation. |
Information required for quotation
Send your RFQ, datasheet or MTO with the required ASTM or UNS material, nominal size, pressure class, end connection, seat material, design temperature, fluid service and quantity. Include inspection and document requirements if specified by your project.
Frequently asked questions
Does A494 M35-2 automatically qualify this valve for a corrosive service?
No. Grade, temperature, pressure, medium chemistry, seat and trim materials all require review.
Can M35-2 Top Entry Ball Valve be ordered in any ASME pressure class?
Not by assumption. Size, pressure class, end connections and actual design availability must be confirmed.
Related enquiry specifications
Pressure, connection and actuator options below are search and RFQ variations, not confirmed supply configurations.
Related terms: Base material and construction keyword
Industrial valve reference images
Images show representative valve constructions; they do not certify the material grade or exact configuration named on this page.
